LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis Coupe 3.8 R-Spec >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine Control System - 2.0L) >> RCV Control Solenoid Valve >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2013 Hyundai Genesis Coupe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the RCV control solenoid valve connector (A) and hose (B).
    Fig 1: Identifying RCV Control Solenoid Valve Connector & Hose
    G00541013Courtesy of HYUNDAI MOTOR CO.
  3. Remove the RCV control solenoid valve bracket after remove the bracket installation bolts (A).
    Fig 2: Identifying RCV Control Solenoid Valve Bracket Bolts
    G00541014Courtesy of HYUNDAI MOTOR CO.
    Fig 3: RCV Control Solenoid Valve
    G00541012Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals