LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis Coupe 3.8 R-Spec >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine Control System - 2.0L) >> Electric WGT Control Actuator >> Repair Procedures >> Inspection >> Position Sensor

Position Sensor

WARNING: This page is about a different car, the 2013 Hyundai Genesis Coupe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Connect the GDS to the data link connector (DLC).
  3. Check the output voltage at each position of the EWGA position sensor on current data item is within specification.

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About LEMON Manuals