LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis Coupe 3.8 R-Spec >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine Control System - 2.0L) >> ETC (Electronic Throttle Control) System >> Troubleshooting >> Fail-Safe Mode

Fail-Safe Mode

WARNING: This page is about a different car, the 2013 Hyundai Genesis Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TROUBLESHOOTING CHART - FAIL-SAFE MODE

Item Fail-Safe
ETC Motor Throttle valve stuck at 5°
TPS TPS 1 fault Replace it with TPS2
TPS 2 fault Replace it with TPS1
TPS 1, 2 fault Throttle valve stuck at 5°
APS TPS 1 fault Replace it with TPS2
TPS 2 fault Replace it with TPS1
TPS 1, 2 fault Throttle valve stuck at 5°
NOTE: When throttle value is stuck at 5°, engine speed is limited at below 1, 500 RPM and vehicle speed at maximum 40 ~ 50 km/h (25 ~ 31 mph)