LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis Coupe 2.0T, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Clutch System) >> Concentric Slave Cylinder Assembly >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the C.S.C. assembly (B) to the transmission case by installing bolts (A-3ea).
    Fig 1: Locating C.S.C. Assembly & Bolt
    G06512639Courtesy of HYUNDAI MOTOR CO.
  2. Install the transmission assembly. (Refer to MANUAL TRANSMISSION SYSTEM - M6VR1 or MANUAL TRANSMISSION SYSTEM - M6VR2
  3. Bleed the air in the C.S.C. system. (Refer to C.S.C. (CONCENTRIC SLAVE CYLINDER) AIR BLEEDING )
scientia non olet · About LEMON Manuals