LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis Coupe 2.0T, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine Control System - 2.0L) >> Engine Control Module (ECM) >> Repair Procedures >> Removal >> M/T

Repair Procedures: Removal: M/T

WARNING: This page is about a different car, the 2013 Hyundai Genesis Coupe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the front strut assembly. (Refer to "FRONT STRUT BAR ").
  3. Disconnect the ECM connector (A).
    Fig 1: Identifying ECM Connector
    G00540650Courtesy of HYUNDAI MOTOR CO.
  4. Remove the ECM after removing the installation bolts (A).
    Fig 2: Identifying ECM Installation Bolts
    G00540651Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals