LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis Coupe 2.0T, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine Control System - 2.0L) >> Engine Control Module (ECM) >> Repair Procedures >> Removal >> A/T

Repair Procedures: Removal: A/T

WARNING: This page is about a different car, the 2013 Hyundai Genesis Coupe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the ECM Connector (A).
  3. Disconnect the TCM connector (B).
  4. Remove the ECM bracket installation bolts (C) and nut (D).
    5. Fig 1: Identifying ECM Connector, TCM Connector, ECM Bracket Bolts, & Nut
    G06514126Courtesy of HYUNDAI MOTOR CO.
  5. Remove the ECM from bracket after removing the installation bolts (A).
    Fig 2: Identifying ECM Bracket Bolts
    G00540649Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals