Repair Procedures: Replacement

Disconnect the battery negative terminal (A).

Fig 1: Identifying Battery Negative Terminal
Courtesy of HYUNDAI MOTOR CO.
Disconnect the alternator connector (B) and cable (A).

Fig 2: Identifying Alternator Connector & Cable
Courtesy of HYUNDAI MOTOR CO.
Remove the drive belt (A) and alternator (B).
Tightening torque:

44.1 ~ 53.9 N.m (4.5 ~ 5.5 kgf.m, 32.5 ~39.7 lb-ft)

Fig 3: Engine Drive Belt Routing Diagram
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse order of removal.