Initializing Method Of The Safety Power Window

When the window cannot be properly closed or opened, safety power window switch needs initializing.

1. Power window operation before initializing
   1. Manual-Down function is not available
   2. Auto-Up function is not available

      (When holding the auto-up/down switch, window is operated as a manual-up/down.)

2. Turn the ignition switch to the ON position.
3. Push down the power window switch until the window glass is entirely down.
4. Turn the ignition switch from OFF to ON within 2 sec.
5. Push down the power window switch three times continuously within 5 sec.