Floor Console Replacement

NOTE:

When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

Remove the console side cover (A).

Fig 1: Removing Console Side Cover
Courtesy of HYUNDAI MOTOR CO.
Remove the knob (A).

Fig 2: Identifying Knob
Courtesy of HYUNDAI MOTOR CO.
Remove the console upper cover (A).

Fig 3: Identifying Console Upper Cover
Courtesy of HYUNDAI MOTOR CO.
Disconnect the connectors (B).

Fig 4: Identifying Connectors
Courtesy of HYUNDAI MOTOR CO.
Remove the parking brake cover (A).

Fig 5: Identifying Parking Brake Cover
Courtesy of HYUNDAI MOTOR CO.
Remove the pad (A).

Fig 6: Identifying Pad
Courtesy of HYUNDAI MOTOR CO.
After loosening the console mounting screws and bolts, remove the floor console assembly (A).

Fig 7: Identifying Console Mounting Screws/Bolts & Floor Console Assembly
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.
NOTE:
- Make sure the connectors are connected in properly.
- Replace any damaged clips.