RF Receiver (2012)

Disconnect the negative (-) battery terminal.
Remove the glove box (A).
(Refer to "CRASH PAD ")

Fig 1: Identifying Glove Box
Courtesy of HYUNDAI MOTOR CO.
Remove the glove box housing (A) after loosening the mounting screws.

Fig 2: Identifying Glove Box Housing & Mounting Screws
Courtesy of HYUNDAI MOTOR CO.
Disconnect the connector after loosening the RF receiver (A) nut (1EA).

Fig 3: Identifying RF Receiver & Nut
Courtesy of HYUNDAI MOTOR CO.