LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis 5.0 >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Electronic Stability Control (ESC) Diagnosis >> DTC C1702: Variant Coding Error >> Scantool Diagnostics >> Variant coding

Variant coding

  1. Connect scantool to Data Link Connector (DLC).
  2. IG "ON"
  3. Using scantool, Perform Variant coding program. (Fig 1)
  4. IG "OFF" and wait for about 10 seconds, and then IG "ON"
  5. IG "OFF" and wait for about 10 seconds again, and then, IG "ON
  6. Go to "COMPONENT INSPECTION " procedure.
    Fig 1: Display - Scantool Diagnostic Item (Variant Coding)
    G08839821Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals