LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis 5.0 R-Spec >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Network System >> Assist Door Module (ADM) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim panel (Refer to the FRONT DOOR )
  3. Remove the door module (ADM) (A) from the front door trim panel after disconnecting module connector.

    Be careful not to damage the door module removing the clip.

    Fig 1: Identifying Assist Door Module
    G08838902Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the door module (A) from the front door trim panel.
    Fig 2: Identifying Front Door Trim Panel Door Module
    G08838903Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals