LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis 4.6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 3.8L) >> Injector Drive Box (IDB) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch off and disconnect the battery negative (-) cable.
  2. Disconnect the injector drive box (IDB) connector (A).
  3. Remove the IDB assembly after removing the bolts (B) and the nuts (C).
    Fig 1: Identifying IDB Assembly Connector Mounting Bolts And Nuts
    G08834128Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals