LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis 4.6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 3.8L) >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the floor mat in the trunk (Refer to "SEAT & POWER SEAT " in BD group).
  3. Remove the service cover (A).
    Fig 1: Identifying Service Cover
    G08834195Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel tank pressure sensor connector (A).
  5. Remove the fuel tank pressure sensor after removing the installation bolt.
    Fig 2: Identifying Fuel Tank Pressure Sensor Connector
    G08834196Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals