LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis 4.6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 3.8L) >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Install the component with the specified torques.
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
CAUTION:
  • Apply the engine oil to the O-ring.
CAUTION:
  • Insert the sensor in the installation hole and be careful not to damage when installation.
CAUTION:
  • Be careful not to damage the sensor housing and the connector.
  • Be careful not to damage the O-ring.
  1. Installation is reverse of removal.

    Camshaft position sensor installation bolt: 

    6.9 ~ 9.8N.m (0.7 ~ 1.0kgf.m, 5.1 ~ 7.2lb-ft)

scientia non olet · About LEMON Manuals