LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Equus Ultimate >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Cruise Control Switch >> Repair Procedures >> Inspection >> Measuring Resistance

Measuring Resistance

  1. Disconnect the cruise control switch connector from the control switch.
    Fig 1: Measuring Resistance Between Control Switch Terminals
    G08830098Courtesy of HYUNDAI MOTOR AMERICA
  2. Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed)
    Function switch Terminal Resistance
    CANCEL 3-4 0Ω
    SET/- 3-4 220Ω
    RES/+ 3-4 1130Ω
    ON/OFF 1-3 3900Ω
  3. If not within specification, replace switch.
scientia non olet · About LEMON Manuals