Repair procedures: Removal

Preparation
1. Remove the rear seat cushion (Refer to Rear Seat ).
2. Remove the service cover of the fuel pump (A).
  
  Fig 1: Identifying Fuel Pump Service Cover
  Courtesy of HYUNDAI MOTOR AMERICA
3. Disconnect the fuel pump connector (A).
  
  Fig 2: Identifying Fuel Pump Connector
  Courtesy of HYUNDAI MOTOR AMERICA
4. Idle the engine and wait until fuel in feed line is exhausted.
5. After engine stops, turn the ignition switch OFF.
Disconnect the fuel feed tube quick-connector (A) and the suction hose (B).
Remove the fuel pump from the fuel tank after removing the installation bolts (C).

Fig 3: Identifying Fuel Feed Tube Quick-Connector, Suction Hose And Installation Bolts
Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Identifying Fuel Pump And Related Components
Courtesy of HYUNDAI MOTOR AMERICA