LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Equus Signature >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Rear Wheel Speed Sensor >> Repair procedures >> Removal

Repair procedures: Removal

  1. Remove the rear wheel speed sensor mounting bolt.

    Tightening torque: 

    6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

    Fig 1: Identifying Rear Wheel Speed Sensor Mounting Bolt
    G08833108Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the rear wheel guard.
  3. Disconnect the rear wheel speed sensor connector (A), then remove the rear wheel speed sensor.
    Fig 2: Identifying Rear Wheel Speed Sensor Connector
    G08833109Courtesy of HYUNDAI MOTOR AMERICA
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals