Visual/Physical Inspection

1. Check immobilizer lamp circuit.
   1. Ignition "ON" & Engine "OFF"
   2. Check if immobilizer lamp operates properly.
      NOTE: Right after ignition "ON", Immobilizer lamp lights up for 30 sec. If lamp blinks 5 times after ignition "ON", there's any fault in immobilizer system.
   3. Is immobilizer lamp operates properly?

YES 

• Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

NO 

• Go to "COMPONENT INSPECTION " procedure.