LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Elantra Touring SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Brake System) >> Front Disc Brake >> Inspection >> Front Brake Pad Check

Front Brake Pad Check

WARNING: This page is about a different car, the 2011 Hyundai Elantra Touring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the pad wear. Measure the pad thickness, replace it if it is less than the specified value.

    Pad thickness 

    Standard value : 11.0 mm (0.43 in)

    Service limit: 2.0 mm (0.0787 in)

    Fig 1: Identifying Pad Thickness
    G06144831Courtesy of HYUNDAI MOTOR CO.
  2. Check that grease is applied, to sliding contact points and the pad and backing metal for damage.
scientia non olet · About LEMON Manuals