LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Elantra Touring SE, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Repair Procedures >> Inspection

Repair Procedures: Inspection

Fig 1: Identifying Ignition Switch Connector
G06145711Courtesy of HYUNDAI MOTOR CO.
Fig 2: Identifying Key Warning Switch Connector
G06145712Courtesy of HYUNDAI MOTOR CO.
  1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.
  2. Check for continuity between the terminals.
  3. If continuity is not specified, replace the switch.
    Fig 3: Continuity Chart
    G06145713Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals