LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Elantra Touring SE, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) >> Body Control Module (BCM) >> Removal

Body Control Module (BCM): Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the upper tray (A).

    (Refer to CRASH PAD )

    Fig 1: Identifying Upper Tray
    G06145369Courtesy of HYUNDAI MOTOR CO.
  3. Remove the crash pad center facia panel (A).
    NOTE: Take care not to scratch the crash pad and related parts.
    Fig 2: Identifying Crash Pad Center Facia Panel
    G06145586Courtesy of HYUNDAI MOTOR CO.
  4. After loosening the mounting clips, then remove the center fascia lower tray (A).
    Fig 3: Identifying Center Fascia Lower Tray
    G06145371Courtesy of HYUNDAI MOTOR CO.
  5. Remove the body control module (A) after loosening 1 bolts and disconnecting connector.
    Fig 4: Identifying Body Control Module
    G06145372Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals