Manual Transaxle Shift Control: Removal

Remove the upper cover (A) from the center console.

Fig 1: Identifying Upper Cover
Courtesy of HYUNDAI MOTOR CO.
Remove the center console, (refer to CONSOLE )

Fig 2: Identifying Center Console
Courtesy of HYUNDAI MOTOR CO.
Remove the snap pin (A) and the clips (B).

Fig 3: Identifying Snap Pin And Clips
Courtesy of HYUNDAI MOTOR CO.
Remove the shift lever assembly (A).

Fig 4: Identifying Shift Lever Assembly
Courtesy of HYUNDAI MOTOR CO.
Remove the clip (A) from the shift cable.

Fig 5: Identifying Clip
Courtesy of HYUNDAI MOTOR CO.
Remove the retainer (A) and the nuts (B).
NOTE: In case, remove the crush pad and cowl cross bar. (refer to CRUSH PAD and HEATER UNIT )

Fig 6: Identifying Retainer And Nuts
Courtesy of HYUNDAI MOTOR CO.
Remove the cable assembly from the transaxle. (refer to REMOVAL )
Remove the select and shift cable assemblies.