LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Elantra Touring GLS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle Control System) >> Transaxle Oil Temperature Sensor >> Removal

Transaxle Oil Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery terminal.
  2. Lift the vehicle.
  3. Remove the under cover.
  4. Loosen the drain plug and drain the transaxle oil.
  5. Remove the oil pan. (Refer to ENGINE BLOCK )
  6. Remove the oil filter.
  7. Remove the valve body. (Refer to VALVE BODY SYSTEM )
  8. Disconnect the main harness connector (A) from the valve body.
Fig 1: Identifying Main Harness Connector Location
G05364282Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals