LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Elantra Touring GLS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle Control System) >> Inhibitor Switch >> Removal

Inhibitor Switch: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery terminal.
  2. Remove the battery and battery tray.
  3. Remove the air duct.
  4. Remove the air cleaner assembly. (Refer to REMOVAL )
  5. Disconnect the inhibitor switch connector (A).
    Fig 1: Identifying Inhibitor Switch Connector
    G05364287Courtesy of HYUNDAI MOTOR CO.
  6. Remove the control cable (A) from the manual control lever.
    Fig 2: Identifying Control Cable And Manual Control Lever
    G05364288Courtesy of HYUNDAI MOTOR CO.
  7. Remove the inhibitor switch and manual control lever.
scientia non olet · About LEMON Manuals