VFS (Variable Force Solenoid) Valve: Installation

Install the solenoid valve (8).
CAUTION: Apply ATF oil or White Vaseline to the O-ring to prevent damage.

Fig 1: Identifying Solenoid Valve And Solenoid Valve Connector
Courtesy of HYUNDAI MOTOR CO.
Connect the solenoid valve connector (A).
CAUTION: When connecting the solenoid valve connector, check the connector for rust, dirt, or oil, then reconnect it.
Install the valve body. (Refer to VFS (VARIABLE FORCE SOLENOID) VALVE )
Tightening torque :

10 ~ 12 Nm (1.0 ~ 1.2 kgf.m, 7 ~ 8 lb-ft)
Install the oil filter.
Tightening torque :

10 ~ 12 Nm (1.0 ~ 1.2 kgf.m, 7 ~ 8 lb-ft)
Continue to apply liquid gasket at application points at the oil pan with Ø2.5 mm (0.098 in) thickness.
Liquid gasket Part name : Threebond 1281B

Fig 2: Identifying Oil Pan Gasket Area
Courtesy of HYUNDAI MOTOR CO.
Tighten the mounting bolt with the specified torque after installing the oil pan.
Tightening torque:

10 ~ 12 Nm (1.0 ~ 1.2 kgf.m, 7 ~ 8 lb-ft)
Install the drain plug.
Tightening torque:

40 ~ 50 Nm (4.0 ~ 5, 0 kgf.m, 28.9 ~ 36.2 lb-ft)
Installation is the reverse of the removal.