Brake Line: Installation

WARNING: This page is about a different car, the 2011 Hyundai Elantra Touring. However, it is still accessible from the selected car via links, so may be relevant.

Install a brake hose (B) on the caliper with tightening brake hose bolt (A) and washer.
Tightening torque :

24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)

Fig 1: Identifying Connector Bolt And Brake Hose
Courtesy of HYUNDAI MOTOR CO.
Connect the brake hose (A) to the brake line (C) using a flare-nut wrench (B).

Fig 2: Identifying Brake Hose, Brake Line And Flare-Nut Wrench
Courtesy of HYUNDAI MOTOR CO.
Install the brake hose clip (A) to the brake hose bracket.

Fig 3: Identifying Brake Hose Clip
Courtesy of HYUNDAI MOTOR CO.
After installing the brake hose, bleed the brake system.
CAUTION:
- Check the brake hoses for interference and twisting.
- Check the brake hose and line joint for leaks, and tighten if necessary.