Fuel Tank: Removal

Preparation
1. Remove the rear seat cushion (Refer to SEAT ASSEMBLY REPLACEMENT ).
2. Open the service cover (A).
  
  Fig 1: Locating Service Cover
  Courtesy of HYUNDAI MOTOR CO.
3. Disconnect the fuel pump connector (A).
  
  Fig 2: Locating Fuel Pump Connector
  Courtesy of HYUNDAI MOTOR CO.
4. Start the engine and wait until fuel in fuel line is exhausted.
5. After engine stalls, turn the ignition switch to OFF position.
Disconnect the fuel feed quick-connector (A), the vapor vacuum tube quick-connector (B), and the canister close valve connector (C).

Fig 3: Locating Fuel Feed Quick-Connector, Vapor Vacuum Tube Quick-Connector And Canister Close Valve Connector
Courtesy of HYUNDAI MOTOR CO.
Lift the vehicle and support the fuel tank with a jack.
Disconnect the fuel filler hose (A), the leveling hose (B) and the vapor hose (C).

Fig 4: Locating Fuel Filler Hose, Leveling Hose And Vapor Hose
Courtesy of HYUNDAI MOTOR CO.
Unscrew the fuel tank band mounting nuts (A) and remove the fuel tank (B).

Fig 5: Locating Fuel Tank Band Mounting Nuts And Fuel Tank
Courtesy of HYUNDAI MOTOR CO.