Fuel Pump: Removal

Preparation
1. Remove the rear seat cushion (Refer to SEAT ASSEMBLY REPLACEMENT ).
2. Open the service cover (A).
  
  Fig 1: Locating Service Cover
  Courtesy of HYUNDAI MOTOR CO.
3. Disconnect the fuel pump connector (A).
  
  Fig 2: Locating Fuel Pump Connector
  Courtesy of HYUNDAI MOTOR CO.
4. Start the engine and wait until fuel in fuel line is exhausted.
5. After engine stalls, turn the ignition switch to OFF position.
Disconnect the fuel feed tube quick-connector (A), the vapor tube quick-connector (B), and the canister close valve connector (C).

Fig 3: Locating Fuel Feed Tube Quick-Connector, Vapor Tube Quick-Connector And Canister Close Valve Connector
Courtesy of HYUNDAI MOTOR CO.
Remove the rubber cover (D).
Remove the fuel pump plate cover (A) with the special service tool (SST No.: 09310-2B200), and then remove the fuel pump assembly

Fig 4: Locating Fuel Pump Plate Cover
Courtesy of HYUNDAI MOTOR CO.

Fig 5: Identifying Fuel Pump Assembly
Courtesy of HYUNDAI MOTOR CO.