LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Elantra GLS, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Smart Key System >> Schematic Diagrams >> Repair procedures >> Removal >> Smart key unit

Smart key unit

  1. Disconnect the negative(-) battery terminal.
  2. Remove the glove box housing.

    (Refer to the "CRASH PAD ")

  3. Remove the smart key unit(A) with loosening bolt and nut, then disconnect the connector.
Fig 1: Smart Key Unit
G07256529Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals