Repair procedures: Replacement
WARNING: This page is about a different variant/trim than selected.
- Remove the lower panel. (Refer to "CRASH PAD " in BD group)
- Remove the IPM. (Refer to ICM (INTEGRATED CIRCUIT MODULE) RELAY BOX , Fuses and Relay article in BE group).
- Remove the parking brake pedal. (Refer to PARKING BRAKE SYSTEM in BR group)
- Remove the 4WD ECU (C) after removing the nut (A-2ea) and the connector (B).
Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)