LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Tucson GL, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control System >> Rear Wheel Speed Sensor >> Repair procedures >> Removal

Repair procedures: Removal

  1. Remove the rear wheel speed sensor mounting bolt (A).

    Tightening torque: 

    6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

    Fig 1: Locating Rear Wheel Speed Sensor Mounting Bolt
    G06874579Courtesy of HYUNDAI MOTOR CO.
  2. Remove the luggage side trim the disconnect the rear wheel speed sensor connector.
  3. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals