LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Sonata GLS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L - Except HEV >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the engine coolant temperature sensor connector (A).
    Fig 1: Identifying Engine Coolant Temperature Sensor Connector
    G07366060Courtesy of HYUNDAI MOTOR CO.
  3. Remove the spring clip (A), and then pull the sensor from the water temperature control assembly.
    Fig 2: Identifying Spring Clip
    G07366061Courtesy of HYUNDAI MOTOR CO.
    CAUTION: Note that engine coolant may be flowed out from the water temperature control assembly when removing the sensor.
  4. Supplement the engine coolant (Refer to "COOLING SYSTEM " ).
scientia non olet · About LEMON Manuals