LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Santa Fe SE, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Manual Transaxle System) >> Manual Transaxle >> Repair procedures >> Installation

Repair procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Installation is the reverse of removal.
  2. After completing the installation perform the following procedure;
    1. Adjust the shift cable.
    2. Refill the all fluids.
    3. Clean the battery posts and cable terminals with sandpaper and grease them to prevent corrosion before installing.