LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> BCM (Body Control Module) >> Repair procedures >> Replacement >> Notes

Repair procedures: Replacement: Notes

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (A). Avoid damaging retaining clip.

    (Refer to the CRASH PAD .

    Fig 1: Identifying Crash Pad Lower Panel
    G06844695Courtesy of HYUNDAI MOTOR CO.
  3. Remove the body control module (A) and antenna cable after loosening 3 bolts and disconnecting connector.
    Fig 2: Identifying Body Control Module
    G06844696Courtesy of HYUNDAI MOTOR CO.
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals