LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Santa Fe SE, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> SRSCM (Supplement Restraint System Control Module) >> Side Impact Sensor (SIS) >> Repair procedures >> Removal >> Rear Side Impact Sensor

Rear Side Impact Sensor

  1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  2. Remove the rear seat. (Refer to REAR SEAT .)
  3. Remove the luggage side trim. (Refer to INTERIOR TRIM .)
  4. Disconnect the side impact sensor connector.
  5. Loosen the side impact sensor mounting bolt and remove the side impact sensor.
    Fig 1: Identifying Rear Side Impact Sensor (RSIS) Connector
    G06844357Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals