LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Santa Fe SE, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - G3.5 DOHC >> Knock Sensor (KS) >> Repair procedures >> Installation

Repair procedures: Installation

CAUTION:
  • Install the component with the specified torques.
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
CAUTION:
  • The sensor connector must be installed parallel to the direction of the engine.
  1. Installation is reverse of removal.

    Knock sensor installation bolt: 

    15.7 ~ 23.5 N.m (1.6 ~ 2.4 kgf.m, 11.6 ~ 17.4 lb-ft)

scientia non olet · About LEMON Manuals