LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Santa Fe SE, AWD >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Exterior >> Tailgate >> Repair procedures >> Replacement >> Latch Assembly Replacement

Latch Assembly Replacement

  1. Remove the tailgate trim.
  2. Disconnect the outside handle rod (A), actuator rod (B).
    Fig 1: Identifying Outside Handle Rod And Actuator Rod
    G06844431Courtesy of HYUNDAI MOTOR CO.
  3. After loosening the mounting screws, then remove the latch assembly (A).
  4. Disconnect the connector (B).
    Fig 2: Latch Assembly And Connector With Torque Specifications
    G06844432Courtesy of HYUNDAI MOTOR CO.
  5. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector is connected properly and the connecting rod is connected properly.
    • Make sure the tailgate opens properly and locks securely.
scientia non olet · About LEMON Manuals