Component Replacement After Deployment
NOTE:
Before doing any SRS repairs, use the Hi-Scan Pro to check for DTCs. Refer to SRS CONTROL MODULE (SRSCM)
list for repairing of the related DTCs.
When the front airbag (s) deployed after a collision, replace the following items:
- SRSCM
- Deployed airbag (s)
- Seat belt pretensioner (s)
- Front impact sensors
- SRS wiring harnesses
- Inspect the clock spring for heat damage.
If any damage found, replace the clock spring.
If any damage found, or problem to occupant detection, replace the Passenger seat with PODS system.
When the side/curtain airbag (s) deployed after a collision, replace the following items:
- SRSCM
- Deployed airbag (s)
- Side impact sensor (s) for the deployed side (s)
- SRS wiring harnesses
After the vehicle is completely repaired, confirm the SRS airbag system is OK.
- Turn the ignition switch ON, the SRS indicator should come on for about 6 seconds and then go off.