LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Genesis 4.6 >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module >> Passenger Occupant Detecting Sensor (PODS) >> Installation

Passenger Occupant Detecting Sensor (PODS): Installation

  1. Install the PODS equipped seat front assembly. (Refer to REPLACEMENT
  2. Reconnect the battery negative cable.
  3. After installing the PODS, confirm proper system operation:
    • Turn the ignition switch ON; the SRS indicator should be turned on for about six seconds and then go off.

      Telltale lamp will turn on for 4 seconds and be turned off for 4 seconds. After the 8 seconds, it shall remain off if the PODS does not require suppression and the passenger airbag is enabled.

    NOTE: Be sure to perform PODS reset with scantool after replacing PODS equipped seat cushion.
scientia non olet · About LEMON Manuals