Repair Procedures: Removal

Bladder & Massage ECU(Rear Seat)

Because removal of front seat bladder & massage ECU assembly is impossible, please inspect with a seat frame assembly unit.

1. Disconnect the negative (-) battery terminal.
2. Remove the rear seat back.

   (Refer to "REAR SEAT ")

3. Disconnect the massage ECU connector (A).
   Fig 1: Identifying Massage ECU Connector

   Courtesy of HYUNDAI MOTOR CO.
4. Remove the bladder (A) and massage ECU assembly (B) after removing the hog rings from the massage bladder.
   Fig 2: Identifying Bladder And ECU Assembly

   Courtesy of HYUNDAI MOTOR CO.