LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Equus Signature >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Power Trunk Module >> Power Latch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the trunk trim in the trunk. (Refer to the TRUNK )
  3. Remove the power latch (A) after removing the bolts (2EA) and connector (B).
    Fig 1: Identifying Power Latch Bolts
    G07313011Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals