Repair Procedures: Installation

Install the two upper arm mounting bolts (A) to the body.
Tightening torque:

55 ~ 65N.m (5.5 ~ 6.5kgf.m, 39.8 ~ 47.0lb-ft)

Fig 1: Identifying Upper Arm Mounting Bolts
Courtesy of HYUNDAI MOTOR CO.
Install the front strut assembly (Refer to Front Strut Assembly ).
Install the upper arm ball joint self-locking nut (A) and the snap pin (B).
Tightening torque:

35 ~ 45N.m (3.5 ~ 4.5kgf.m, 25.3 ~ 32.5lb-ft)

Fig 2: Identifying Upper Arm Ball Joint Self-Locking Nut And Snap Pin
Courtesy of HYUNDAI MOTOR CO.
Install the wheel and the tire (A) to the front hub (B).
Tightening torque:

90 ~ 110N.m (9 ~ 11kgf.m, 65.1 ~ 79.5lb-ft)

Fig 3: Identifying Wheel And Tire With Front Hub
Courtesy of HYUNDAI MOTOR CO.

CAUTION: Be careful not to damage the hub bolts (C) when installing the front wheel and tire (A).