Repair procedures: Disassembly

WARNING: This page is about a different car, the 2011 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the nuts (B) and then remove the cover (A).

Fig 1: Cover
Courtesy of HYUNDAI MOTOR CO.
Loosen the mounting bolts (A) and remove the regulator assembly (B).

Fig 2: Mounting Bolts
Courtesy of HYUNDAI MOTOR CO.
Remove the slip ring guide (A).

Fig 3: Identifying Slip Ring Guide
Courtesy of HYUNDAI MOTOR CO.
Using the SST (09373-27000), remove the pulley (A).

Fig 4: Removing Pulley
Courtesy of HYUNDAI MOTOR CO.
Loosen the 4 bolts (A) and then remove the rear housing (B).

Fig 5: Rear Housing Bolt
Courtesy of HYUNDAI MOTOR CO.
Disconnect the rotor (A) and the housing (B).

Fig 6: Rotor
Courtesy of HYUNDAI MOTOR CO.
Reassembly is the reverse order of disassembly.