Repair Procedures: Installation

WARNING: This page is about a different car, the 2011 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

Installation is the reverse of removal.

CAUTION: After replacement or reinstallation procedure of the valve body assembly, must perform procedures below.

NOTE:

Adding automatic transaxle fluid. (Refer to "HYDRAULIC SYSTEM (FLUID) " )
Perform TCM learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup. (Refer to "AUTOMATIC TRANSAXLE CONTROL SYSTEM (REPAIR PROCEDURES) " )