General Information: DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item		Detecting Condition	Possible cause
DTC Strategy		Determine if a multiple cylinder misfire or a cylinder specific misfire is occurring by monitoring crankshaft acceleration.	Faulty Spark plugs Faulty Spark plug cables Air Leakage Belt deflection and Air gap of CKPS Incorrect timing Faulty injector Improper fuel pressure Improper engine compression
Enable Conditions		No disabling faults present/no disabling Active Faults P0340/P0341/P0118/P0117/P0115/P0336/P0335/P1295/P0103/P0102/0108/P0107/P0106/P0501 Engine speed between 550 and 5800 RPM System voltage between 9 and 18 volts The ECT indicates an engine temperature between -6°C(20°F) and 120°C(248°F)
Threshold value	Case 1	Individual cylinder misfire detection
	Case 2	Emissions damaging - 18 times in 600 ignitions (In case that the misfire affects more than 1.5 times than FTP emissions)
	Case 3	Catalyst damaging - 95 times in 600 ignitions at idle (It is going to be changeable according to the load or the temperature which is not in the range where it does not melt catalyst)
Diagnosis Time		Continuous
MIL On Condition		2 Driving Cycles