Repair Procedures: Installation

Install the brake shoe (A) to the backing plate (B).

Fig 1: Identifying Brake Shoe And Backing Plate
Courtesy of HYUNDAI MOTOR CO.
Connect the parking brake wire to the brake shoe.
After installing the strut assembly (A), install the adjuster assembly (B) and the lower return spring (C).

Fig 2: Identifying Strut Assembly, Adjuster Assembly And Lower Return Spring
Courtesy of HYUNDAI MOTOR CO.
While pressing the spring, install the brake shoe hold down pin (A) and spring (B).

Fig 3: Identifying Brake Shoe Hold Down Pin And Spring
Courtesy of HYUNDAI MOTOR CO.
Grease where it is necessary.
Install the rear axle hub (A) and the brake disk (Refer to REAR HUB - AXLE

Fig 4: Identifying Rear Axle Hub
Courtesy of HYUNDAI MOTOR CO.
Install the rear wheel and tire to the rear hub.
Tighten the parking brake adjusting nut.
Install the floor console (Refer to CONSOLE '
Install the parking brake mounting bolt (A) and the wire (B).

Fig 5: Identifying Parking Brake Mounting Bolt And Wire
Courtesy of HYUNDAI MOTOR CO.