LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Azera GLS >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control Switch >> Repair Procedures >> Inspection >> Measuring Resistance

Measuring Resistance

  1. Disconnect the cruise control switch connector from the control switch.
    Fig 1: Identifying Cruise Control Switch Connector
    G06804985Courtesy of HYUNDAI MOTOR CO.
  2. Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).
    CONTROL SWITCH REFERENCE CHART

    Function switch Terminal Resistance
    Cruise Main RH 1-2 3.9kΩ ± 1%
    Cancel RH 1-3 0Ω ± 1%
    Set/Coast RH 1-3 220Ω ± 1%
    Resume/Accel RH 1-3 910Ω ± 1%
  3. If not within specification, replace switch.
scientia non olet · About LEMON Manuals