LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Accent GLS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Transaxle Oil Temperature Sensor >> Repair procedures (A4AF3) >> Inspection

Repair procedures (A4AF3): Inspection

  1. Remove the battery terminal.
  2. Lift the vehicle.
  3. Remove the side cover (A). (Bolt: 2EA)
    Fig 1: Identifying Side Cover
    G06879732Courtesy of HYUNDAI MOTOR CO.
  4. Disconnect the fluid temperature sensor connector (A).
    Fig 2: Identifying Fluid Temperature Sensor Connector
    G06879733Courtesy of HYUNDAI MOTOR CO.
  5. Measure the resistance between terminals "1" and "2" of the fluid temperature sensor connector on the transaxle case.
    Fig 3: Measuring Resistance Between Terminals 1 And 2 Of Fluid Temperature Sensor Connector
    G06879734Courtesy of HYUNDAI MOTOR CO.
    FLUID TEMPERATURE SENSOR TEMPERATURE AND RESISTANCE SPECIFICATIONS

    Temp. [°C (°F)] Resistance (kΩ) Temp. [°C (°F)] Resistance (kΩ)
    -40 (-40) 139.5 80 (176) 1.08
    -20 (-4) 47.7 100 (212) 0.63
    0 (32) 18.6 120 (248) 0.38
    20 (68) 8.1 140 (284) 0.25
    40 (104) 3.8 160 (320) 0.16
    60 (140) 1.98    
  6. If the result isn't within the standard value, remove the valve body cover.
  7. Replace the fluid temperature sensor (A).
    Fig 4: Identifying Fluid Temperature Sensor
    G06879735Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals