LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Accent GLS, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> General Information (Restraints) >> General Safety Information and Caution >> Precautions >> Spring-loaded Lock Connector >> Connecting

Spring-loaded Lock Connector: Connecting

  1. To reconnect, hold the pawl-side connector half, and press on the back of the sleeve-side connector half in the direction shown. As the two connector halves are pressed together, the sleeve (A) is pushed back by the pawl (C). Do not touch the sleeve.
    Fig 1: Pressing On Back Of Sleeve-Side Connector
    G06882363Courtesy of HYUNDAI MOTOR CO.
  2. When the connector halves are completely connected, the pawl is released, and the spring-loaded sleeve locks the connector.
    Fig 2: Connecting Spring-Loaded Sleeve Connector
    G06882364Courtesy of HYUNDAI MOTOR CO.


Hold both connector halves and press firmly until the projection (C) of the sleeve-side connector clicks to lock.

Fig 1: Connecting Sleeve-Side Connector
G06882366Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals